2024 New Holland Construction Tractor Loaders U80D

Information

2024 New Holland Construction Tractor Loaders U80D

PROFIT-MAKING POWER ON THE FRONT AND THE BACK

The New Holland U80D tractor loader gives you versatility that pays. With 74 gross hp, you get responsive power at both the bucket and hitch for loading, stacking, scraping and leveling. The U80D produces clean power, meeting Tier 4 Final certifications by using a Particular Matter Catalyst (PM-Cat) solution. This solution is based on particulate matter’s continuous passive regeneration of soot by NO2 generated on the DOC: C + NO2 = NO + CO/CO2.

Features may include:
  • Operator Environment

The large, efficient, flat-deck operator platform provides easy-to-use controls and unobstructed views for outstanding visibility of the work site.

  • Engine And Chassis

With 74 gross hp of clean power produced by its Tier 4 Final certified engine, you get responsive power at both the bucket and hitch for loading, stacking, scraping and leveling. The U80D meets Tier 4 Final certifications by using a Particular Matter Catalyst (PM-Cat) solution. This solution is based on particulate matter’s continuous passive regeneration of soot by NO2 generated on the DOC: C + NO2 = NO + CO/CO2.

  • Axles And Transmission

The smooth synchromesh with power shuttle lets you make smooth direction changes between the four forward and four reverse gears.

  • Hydraulics

The curved-arm loader linkage provided on the U80D tractor loader provides hydraulic bucket leveling for less spillback, as well as excellent reach at maximum dump height for truck loading. The unique reverse-mounted loader arm cylinders give you maximum bucket breakout force and superior dump speed on the bucket.

  • Maintenance

Routine care is the key to equipment performance and longevity. The D Series tractor loader is designed for fast, easy routine service checks. Easy access is provided to all key fuel, engine, transmission and hydraulic filters, and all engine servicing can now be performed from one side for added convenience.

Photos

Highlights

  • Dry Ridge, Kentucky
  • 2024
  • New Holland Construction
  • Tractor Loaders U80D
  • F5HFL463D F005
  • 4 speed synchromesh with hydraulically actuated clutches and electric F/R shuttle control, clutch disconnect buttons on the transmission shifter and loader control lever
  • Available

Specifications

  • 2024
  • New Holland Construction
  • Tractor Loaders
  • U80D
  • Large
  • F5HFL463D F005
  • Turbocharged
  • 4
  • Horsepower (SAE J1349) Gross @ 2,200 rpm: 74 hp (55 kW) | Net @ 2,200 rpm: 68.4 hp (51 kW)
  • 207 in3 (3.4 l)
  • 3.9 in (99 mm)
  • 4.33 in (110 mm)
  • Full load: 2,200 RPM | Low idle: Low idle RPM | High idle, no load: 2,330 - 2,430 RPM
  • Gross: 233 lb-ft (316 Nm) | Net: 219 lb-ft (298 Nm) | Torque rise at rated speed: 35%
  • Torque converter ratio (standard): 3:1 | Torque converter (PTO ready): 3.2:1
  • Direct HPCR (High Pressure Common Rail)
  • 4 speed synchromesh with hydraulically actuated clutches and electric F/R shuttle control, clutch disconnect buttons on the transmission shifter and loader control lever
  • On the go push-button activation
  • 2/4 WD-17.5 L x 24, 10-ply rating STD, 2/4 WD-19.5 L x 24, 10-ply rating OPT
  • 2/4 WD-17.5 L x 24, 10-ply rating STD, 2/4 WD-19.5 L x 24, 10-ply rating OPT
  • Individually applied hydraulically actuated, maintenance-free, self adjusting outboard mounted wet disc
  • Trans Mounted SAHR (Spring Applied Hydraulic Release)
  • 12 Volts, negative ground | Power plugs, amps: 30 total
  • 120 amps
  • 850 CCA
  • Gear-type, transmission mounted, direct drive to engine crankshaft
  • Loader flow @ rated engine rpm: 28.5 gpm @ 3,000 psi (108 L/min @ 207 bar) | Loader auxiliary hydraulics: 12 to 28.5 gpm (45.4 to 108 L/min)
  • Main relief pressure: 3,050 + 50 - 50 psi @ 28.5 gpm (210 + 3 - 3 bar @ 108 L/min)
  • Forward/Reverse (standard): 1st 3.8 mph (6.1 km/h) / 2nd 6.1 mph (9.8 km/h) / 3rd 12.8 mph (20.6 km/h) / 4th 24.0 mph (38.6 km/h) | Forward/Reverse (PTO Ready): 1st 3.5 mph (5.6 km/h) / 2nd 5.5 mph (8.9 km/h) / 3rd 11.8 mph (19 km/h) / 4th 21.3 mph (34.3 km/h)
  • Lift cylinders Long Lip Bucket / 4 IN 1® Bucket : 9271 lb (41 239 N) / 8766 lb (38 993 N) | Dump cylinders Long Lip Bucket / 4 IN 1® Bucket: 9607 lb (42 734 N) / 10,325 lb (45 928 N)
  • 3-pt hitch flow @ rated engine rpm: 3 to 8 gpm @ 2,000 psi (0 to 30 L/min @ 137 bar) | 3-pt hitch control valve: Sectional 4-spool, open-center parallel circuits with variable control for lift, pitch, tilt, and 2 auxiliary remotes
  • Lowest point: 2500 lbs (11,121 N) / 1/5: 3247 lbs (14,444 N) / 2/5: 3400 lbs (15,125 N) / 3/5: 3501 lbs (15,574 N) / 4/5: 3297 lbs (14,666 N) / Highest point: 2984 lbs (13,274 N)
  • Long Life Bucket: .87 yd3 (.67 m3) | 4-in-1 Bucket: .85 yd3 (.65 m3)
  • Long Life Bucket: 1.03 yd3 (0.79 m3) | 4-in-1 Bucket: 1.04 yd3 (0.80 m3)
  • 30 gal (114 l)
  • Total: 19 gal (72 l) | Reservoir w/filter: 15.3 gal (58 l) | Reservoir w/o filter: 14.8 gal (56 l)
  • Loader control valve: 2 or 3-spool with single lever control for lift, dump and tilt and auxiliary hydraulics, positive hold float and return-to-dig | Filtration: 7 micron full flow replaceable cartridge on return line, condition indicator light for filter
  • 4WD Differential 5.8 qt (5.5 L) / Planetaries (each) 0.75 qt (0.7 L)
  • Differential 14.4 qt (13.6 L) / Planetaries (each) 1.6 qt (1.5 L)
  • Engine oil w/filter: 8.5 qt (8 L)
  • 17 qt (16.1 L)
  • Base Unit (lbs. (kg): 10,916 lbs (495 kg) | 4-in-1 Bucket: 1451 lbs (658 kg)