A single domed 10ga continuously welded deck makes the cutter extremely easy to clean, prevents water pooling, rusting and helps shed debris
An 80° CV shaft allows for smooth power transmission during tight turns. The “Best in Class” drive system features a category 6 CV for 540rpm. The drive line on the cutter itself employs self-adjusting system features a category 6 CV for 540rpm. The drive line on the cutter itself employs self-adjusting friction clutches to protect your investment and always operate at peak performance
Equipped with Schulte Super Suction Blades with 6.5 ” blade overlap for maximum grass lift and cut
A four gearbox drive line with independent slip clutches
Deck protection rings are standard and protect the cutter deck from rising blades
Deep 13 5/8” deck combined with high blade tip speeds, provides a faster cut rate than competitors
High flex wing working range of 25° down to 90° up
Blade Tip Speed 540 rpm: Center - 16,286 ft/min (4964m/min), Wing - 16031 ft/min (4886 m/min)
Cutting capacity: 2.5” (89mm) | Blade Overlap: 6.5” (165mm) | Deck Thickness: .135” (10ga or 3.4mm) | Side Skirt Depth & Thickness: 13.6” (346mm) 1/4” (6.4mm) | Wing Working Range: 25° down to 90° up | Wing Floating Range: 25° down to 30° up
