2025 Schulte Rotary Cutters Mowers TPX-318

Information

2025 Schulte Rotary Cutters Mowers TPX-318

Features may include:

  • 18.5 feet wide, with fixed knives and shrouding for optimum shredding performance and distribution when doing residue management in row crops like corn, cotton and sugar cane
  • Adjustable wheel standards for shredding in virtually all row crop spacings
  • Four position adjustable 3pt to keep cutter as close to the tractor as possible
  • Heavy duty rubber coupler on drive line for protection in harsh conditions
  • Fold up design for narrow transport width
  • Greasable bushings everywhere for longer life
  • Timed blades (without blade to blade contact) allow for a compact front to back length
  • Large flotation skid steer tires (10.5” X 27”) to minimize compaction
  • Easy height adjustment on rear tires
  • Double acting wings that can be locked off in rigid position for row crops or flex wing for ground contouring
  • Only one hydraulic circuit needed to operate this unit
  • Wide hinge gap to keep debris from falling on centre deck when folding up wings

Photos

Highlights

  • Dry Ridge, Kentucky
  • 2025
  • Schulte
  • Rotary Cutters Mowers TPX-318
  • Available
  • Machine: 8.75 ft (2,67 m) | Cut: 2” - 17” (5-43 cm)

Specifications

  • 2025
  • Schulte
  • Rotary Cutters Mowers
  • TPX-318
  • Finish Mower
  • 185 HP (136 kw) (3pt lift capacity dependent)
  • Max: 325 HP (239 kw)Splitter box: 210 hp (157 kw) | Down boxes: 210 hp (157 kw)
  • Tractor: 1000 RPM
  • Skid steer - 10.5 (26.7 cm) x 27” (68.6 cm)
  • Center blade tip speed: 16,308 (ft/min) | Wing blade tip speed: 16,308 (ft/min)
  • 10 ga (.34 cm)
  • 3pt hitch: Cat 2 quick, cat 3, cat 3 quick, cat 4, cat 4 quick
  • Cut capacity: 3.5” (8.9 cm) | Blades: 1/2” x 4” (1.3 cm X 10.2 cm) | Blade overlap: 3” (7.6 cm) | Wing float (when in float position): 11 degrees down & 18 degrees up (lower cylinder mount) / 0 degrees down & 20 degrees up (upper mount)
  • 18.5’ (5.64 m)
  • 116.5” (296 cm) wing tip to wing tip
  • Machine: 8.75 ft (2,67 m) | Cut: 2” - 17” (5-43 cm)
  • Machine: 12.7 ft (3.87 m)
  • Approximate: 6,300 lbs (2858 kg)
  • 1000: Cat 6 with clutch | Cutter shafts : Cat 6 with rubber coupler | Safety deflectors: Single chains standard, rear and front belting option